Descrizione

LAMPADA PER STECCA-DIN ELD-RGB-DIN VERDE/ROSSA/BLU

 

• Modello ELD-RGB-DIN
• Grado di protezione IP20
• Colore Rosso/Verde/Blu
• Tensione dell’indicazione 230V
• Corrente nominale a 400V <20A                                                                     
•  

Description:
These are devices used in control and indication systems adjusted for mounting in command boards
and panels directly on DIN-rail. They are manufactured to commutate controlling circuits and to control
the switching on or off executive mechanisms such as relays, contactors, etc. The signal lamps and
indicators find broad application in all industrial fields. The devices endure short time current overload
up to 20A, and normally they can commutate current up to 10A with their contact system. The
connection to the contact terminals is through screw terminals to which operational conductors with
section up to 2.5mm² can be joined. There are also designed buttons combined with lamps.
Technical data:
&blacksquare; Insulation voltage: 660V; 50/60Hz
&blacksquare; Impulse voltage wear resistance: 6000V;
&blacksquare; Rated current: up to 10A (230V AC)
&blacksquare; Short circuit protection: safety device 10A gG outside in the circuit
&blacksquare; Rated consumed current (for indicators and buttons combined with indicators): <20mA
&blacksquare; Wear resistance (indicators): >2000h
&blacksquare; Mechanical wear resistance (buttons): 1×106 commutation cycles
&blacksquare; Power of mechanical compression:
– at closing: 20N
– at opening: 8N
&blacksquare; Operating temperature: -20 – +65°C
&blacksquare; Humidity: 35 – 85%RH
&blacksquare; Tightening moment of the joining conductors: 0.15Nm
&blacksquare; Section of the conductor: 1×0.5; 1×0.75; 1×1; 1×1.5; 1×2.5mm²
&blacksquare; Plastic: UV rays wear resistance
&blacksquare; To a DIN-rail
&blacksquare; Altitude: up to 2000m